Janome 230DC Service & Repair
If your Janome 230DC sewing machine has developed a fault, phone Bambers. Your 230DC may just require a service depending on usage. Either way, come to Bambers for expert attention. As Main Agents for Janome we have all the experience required to get your sewing machine working nicely again. Sometimes the issue can be resolved quickly. For instance, the needle is in the wrong way round. Therefore your 230DC will miss and skip stitches. In addition the choice of needles and threads may have an impact. Above all please feel free to phone us for some friendly advice. The Janome 230DC is a good quality machine. However the way you use it can make a difference to the quality of sewing.
Janome 230DC Sewing Machine Troubleshooting Check List
Good quality needle – Schmetz and thread – Gutermann
Thread machine with presser foot in raised position.
Double check that you have threaded the take-up lever properly.
Place top & bottom threads under the presser foot and on top of the fabric before you begin to sew
Make sure feed dogs are raised.
Always turn the balance wheel towards you one revolution after raising the feed dogs.
Bamber Sewing Machines
445 – 449 Liverpool Road
0161 707 7786